Brazing Pastes
Brazing Pastes
GS Metal Joining supplies brazing pastes across a full range of alloy families, manufactured by LINBRAZE S.R.L. — one of Europe's leading producers of metal powders and brazing pastes.
Brazing paste combines alloy powder and flux binder in a single, ready-to-apply material, making it the standard specification for induction brazing, furnace brazing and any automated or semi-automated production process where precise, repeatable alloy and flux placement is required.
As UK representative of LINBRAZE, we can offer access to a comprehensive paste range at competitive pricing, with the technical support of a specialist metal joining team.

What is brazing paste?
Brazing paste is a pre-mixed combination of brazing alloy powder and flux, supplied in a single product that is applied directly to the joint before heating. When the joint reaches brazing temperature, the flux activates, the alloy melts and flows into the joint by capillary action — the same process as rod brazing, but with the alloy and flux delivered in a single, precisely placed deposit.
The paste format offers significant advantages in production and automated brazing environments: consistent alloy quantity per joint, precise placement with no manual rod feeding, compatibility with automated dispensing equipment, and reduced operator skill dependency compared to hand torch brazing with rod and flux. All brazing pastes in our range are produced by LINBRAZE S.R.L. of Italy, a world-leading manufacturer of brazing pastes and metal powders.
Advantages of brazing paste
-
Consistent alloy quantity
Paste dispensing — by hand syringe or automated equipment — delivers a controlled, repeatable quantity of alloy to every joint. Rod brazing relies on operator judgement for quantity; paste removes that variable and reduces the risk of both under- and over-filling.
-
Precise placement
Paste is applied exactly where it is needed before heating begins. The alloy stays in place during heat-up and flows into the joint at brazing temperature. No rod feeding during the brazing cycle — the operator or machine heats only, without managing rod placement simultaneously.
-
Automation compatible
Brazing paste is compatible with robotic dispensing, conveyor furnace brazing and induction brazing. The paste format enables full automation of the alloy application step — not possible with rod and flux — making it the standard specification for high-volume production brazing operations.
-
Bespoke formulations available
Through our LINBRAZE partnership, bespoke paste formulations are available for specific alloy compositions, flux types, particle sizes and rheologies not available as standard products. Contact us with your process parameters and base metal requirements to discuss a custom formulation.
Standard paste range
All pastes are produced by LINBRAZE S.R.L. and supplied in syringe or tub form. Shelf life is typically 12 months from manufacture when stored at 5–25°C away from direct sunlight. Contact us for bespoke formulations, specific particle size requirements or flux type variants not listed here.
| Grade | Alloy equivalent | % Silver | Melting range | Flux type | Suited to |
|---|---|---|---|---|---|
| Paste AG103 | AG103 | 55 | 630–660°C | FH10 | Copper, brass, mild steel — general production brazing |
| Paste AG105 | AG105 | 40 | 650–710°C | FH10 | Copper, brass, mild steel — economy production brazing |
| Paste L-AG45SnSi | L-AG45SnSi | 45 | 640–680°C | FH12 | Stainless steel, nickel alloys — special applications |
| Paste CP102 | CP102 | 15 | 645–800°C | Self-fluxing on copper | Copper-to-copper, HVAC and refrigeration |
Produced by LINBRAZE S.R.L.
All brazing pastes in our range are produced by LINBRAZE S.R.L. of Italy — a world-leading specialist manufacturer of brazing pastes, metal powders and specialist brazing alloy formulations. As the UK representative of LINBRAZE, we provide direct access to their full production capability, including bespoke paste formulations not available through standard distribution channels.
LINBRAZE pastes are used in precision manufacturing, automotive, HVAC, refrigeration, electrical and aerospace production environments worldwide. Where a standard paste grade does not meet your specific alloy, flux, rheology or particle size requirement, contact us to discuss a custom formulation direct from the manufacturer.
Frequently asked questions
When should I use brazing paste instead of rod and flux?
Brazing paste is the preferred specification when any of the following apply: you are brazing in production volume and need consistent, repeatable alloy quantity per joint; joint access during the brazing cycle makes rod feeding difficult or impossible; you are using automated or semi-automated brazing (robotic dispensing, conveyor furnace); or operator skill variability is causing inconsistent joint quality. For one-off or low-volume hand torch work, rod and flux remains practical — but paste is more process-capable at volume.
How do I apply brazing paste?
Apply paste to the joint area using a syringe, spatula or automated dispenser before any heat is applied. The paste should be deposited at or near the joint entry point — capillary action will draw the molten alloy into the joint when brazing temperature is reached. Quantity should be sufficient to fill the joint but not excessive — surplus paste that flows outside the joint area will leave alloy residue on the base metal surface. For automated dispensing, work with us to establish the correct deposit weight and bead geometry for your joint design.
Does brazing paste contain flux?
Yes — brazing paste is a pre-mixed combination of alloy powder and flux. No separate flux application is required. The flux type is matched to the alloy and base metal in each paste formulation: standard silver alloy pastes (AG103, AG105) use an FH10 flux suitable for copper, brass and mild steel; the L-AG45SnSi paste uses an FH12 flux for stainless steel and nickel alloys; and the CP102 paste is self-fluxing on copper. Flux residue must be removed after brazing in the same way as paste brazing flux.
Can I get a brazing paste for stainless steel?
Yes — Paste L-AG45SnSi is formulated specifically for stainless steel and nickel alloys, combining an L-AG45SnSi alloy powder (45% silver, 640–680°C) with an FH12 flux equivalent to Stay-Silv Black. It is the paste equivalent of the L-AG45SnSi rod-and-flux combination used for hand brazing of stainless steel. Contact us for quantity and packaging options.
How should brazing paste be stored?
Store at 5–25°C, away from direct sunlight and heat sources. Do not freeze. Keep containers sealed when not in use — exposure to air can cause the paste to dry out or the flux to degrade. Shelf life is typically 12 months from manufacture when stored correctly. If paste has thickened or separated in storage, do not use — contact us for a replacement. Do not attempt to thin paste with water or solvents.
Can you produce a bespoke paste formulation?
Yes — through our LINBRAZE partnership, bespoke brazing paste formulations are available for alloy compositions, flux types, particle sizes and rheologies not available as standard products. This includes pastes for specific automated dispensing systems, furnace brazing environments, and base metal combinations requiring non-standard flux chemistry. Contact us with your process parameters, base metals, joint design and production volume to discuss a custom formulation.
Why Choose GS Metal Joining?
-
Certified materials
All brazing pastes are produced by LINBRAZE S.R.L. to consistent composition standards. Alloy content conforms to EN1044. Fully RoHS and COSHH compliant. Safety data sheets and technical data sheets available on request.
-
Technical expertise
Over 110 years of combined experience in silver soldering and brazing, including production and automated brazing applications. We advise on paste selection, dispensing parameters, joint design and process optimisation for automated brazing lines.
-
Competitive pricing
As a focused, efficient business with tightly controlled overheads, we offer genuinely competitive pricing at every order size — from sample syringes to production volume tub and cartridge quantities.
-
LINBRAZE partnership
As UK representative of LINBRAZE S.R.L. of Italy, we offer direct access to one of the world's leading brazing paste manufacturers — including bespoke formulations, custom packaging and technical support direct from the production team.