How to Use This Guide
Find your alloy
Answer three questions to get a recommended alloy and flux combination for your application.
Quick Reference
| Application | Recommended alloy | Flux | Notes |
|---|---|---|---|
| General engineering — copper, brass, mild steel | AG103 (or AG105/AG107 for cost) | GS30 | Most versatile starting point |
| Refrigeration copper pipework | CP102 or CP101 | None on copper-to-copper | GS30 required on brass fittings |
| HVAC copper pipework | CP103 or CP102 | None on copper-to-copper | GS30 required on brass fittings |
| Stainless steel | L-AG45SnSi | Stay-Silv Black | Specialist flux essential |
| Nickel alloys | L-AG45SnSi | Stay-Silv Black | Never use copper phosphorus alloys |
| Tungsten carbide to steel | High-silver alloy | Stay-Silv Black | Cool slowly — contact us for specification |
| Aluminium brazing | Al12Si | AlSi flux | Propane, staged heating |
| Aluminium soldering and aluminium to dissimilar metals | Alloy 2207 | Stayclean Aluminium | Lead-free, low temperature |
| Plumbing and heating copper pipework (brazed) | CP201 or CP202 | None on copper-to-copper | CP103 or CP104 for gas and higher pressure |
| Aerospace | AG103 or L-AG45SnSi | GS30 or Stay-Silv Black | Full certification and traceability — contact us |
| Colour match on polished brass | AG104 | GS30 | Feed as ring or preform from inside the joint |
| Production, induction and furnace brazing | Preforms or brazing paste | As alloy, or incorporated in paste | Contact us with joint geometry |