Specialist suppliers of silver solder, brazing alloys and fluxes to industry

GS Metal Joining is a UK specialist supplier of silver brazing alloys, copper phosphorus alloys, soft solders, brazing pastes and fluxes. We supply manufacturers, contractors and distributors across a wide range of industries — from refrigeration and HVAC to aerospace, military and shipbuilding.

Our materials conform to EN1044, BS1845 and EN17672, with aerospace materials available with full certification and traceability documentation. As a focused, specialist business, we combine certified, competitively priced materials with over 110 years of combined technical expertise in silver soldering and brazing — available to every customer, at every order size.

A complete range of metal joining materials

From general-purpose silver brazing alloys for everyday engineering to certified aerospace materials, we supply the full spectrum of silver brazing alloys, copper phosphorus alloys, soft solders, brazing pastes and fluxes.

All materials are available in a comprehensive range of forms — bare rods, flux-coated rods, wire, preforms, paste and powder — with non-stock forms available to order. As UK representative of LINBRAZE S.R.L. of Italy, we also supply brazing pastes and metal powders across a wide range of alloy compositions for induction brazing, furnace brazing and automated production processes.

Browse products

Not sure where to start?

Alloy selection depends on more than base metal — joint design, working temperature, certification requirements, available forms and cost all influence the right specification.

Our technical team has over 110 years of combined experience in silver soldering and brazing and is happy to advise on the right material for your application before you order.

Quotes are provided promptly and without obligation — for any order size.

Request a quote

Industries we supply

We supply brazing and soldering materials to manufacturers, contractors and distributors across a range of demanding industries. Each sector has specific material, certification and supply requirements — we have the experience and product range to meet them.

  • Automotive

    Silver brazing alloys and copper-phosphorus alloys for fuel systems, brake lines, heat exchangers and turbocharger assemblies. OEM production and aftermarket repair.

    Automotive materials 
  • Refrigeration

    Copper-phosphorus and silver brazing alloys for commercial and industrial refrigeration systems. Copper tube and fitting joints, compressor assemblies and heat exchanger manufacture.

    Refrigeration materials 
  • HVAC & Air Conditioning

    Copper-phosphorus and silver brazing alloys for HVAC manufacture and installation. Copper pipework joints, heat exchanger assemblies and connections to brass and aluminium components.

    HVAC materials 
  • Plumbing & Heating

    Copper-phosphorus and silver brazing alloys for domestic and commercial plumbing, heating and gas installations. Soft solders and fluxes for plumbing and general fabrication.

    Plumbing materials 
  • Aerospace

    Silver brazing alloys for aerospace structural and fluid system applications. Full material certification, conformance to EN1044, BS1845 and EN17672, and batch traceability documentation.

    Aerospace materials 
  • Military & Defence

    Specialist brazing materials for defence manufacturing, shipbuilding and high-integrity joining applications. Full documentation packages to customer-specified requirements.

    Defence materials 
  • Certified materials

    All silver brazing alloys conform to EN1044. Manufactured exclusively from virgin raw materials — fully RoHS and COSHH compliant. Full certification and traceability documentation available on request.

  • Technical expertise

    Over 110 years of combined experience in silver soldering and brazing. We advise on alloy and flux selection, joint design, process troubleshooting and specification compliance. Technical support is part of the service — not a premium add-on.

  • Competitive pricing

    As a focused, efficient business with tightly controlled overheads, we offer genuinely competitive pricing at every order size — whether you are a small user, a specialist contractor or a volume distributor.

  • LINBRAZE partnership

    As UK representative of LINBRAZE S.R.L. of Italy, we provide access to a world-leading manufacturer of metal powders and brazing pastes — including bespoke alloy formulations, specialist particle sizes and packaging formats not available through standard distributors.

1 of 3

Frequently Asked Questions

What is the difference between brazing and soldering?

Brazing and soldering are both capillary joining processes — molten filler metal is drawn into a joint gap by capillary action to bond two base metals. The distinction is temperature. Soldering takes place below 450°C using soft solders; brazing takes place above 450°C using silver brazing alloys or copper phosphorus alloys. Brazed joints are generally stronger and more heat-resistant than soldered joints, making brazing the standard process for structural and pressure-critical applications.

What metals can be joined by silver brazing?

Silver brazing alloys are suitable for joining copper, brass, bronze, mild steel, carbon steel, stainless steel, nickel alloys and tungsten carbide, including dissimilar combinations of these metals. They are not suitable for aluminium or zinc-based alloys. For aluminium joining, we supply a dedicated range of specialist alloys including Al12Si, Alusol, Technoweld and alloy 2207.

Do I always need flux when brazing?

Not always. Copper phosphorus alloys are self-fluxing on copper in air — no separate flux is required for copper-to-copper joints. For all other base metal combinations, and for silver brazing alloys on any base metal, a brazing flux is required to remove surface oxides and promote alloy flow. Flux-coated rods incorporate flux into the rod coating, eliminating the need for separately applied flux in most standard applications.

What causes a brazed joint to fail?

Most brazed joint failures are process related rather than material related. The most common causes are incorrect or exhausted flux, poor heating technique resulting in uneven temperature distribution, joint gaps that are too wide for effective capillary action, surface contamination from oil or grease, and insufficient alloy quantity. Our technical guides and troubleshooting resources cover each of these in detail.

What is the correct joint gap for silver brazing?

For most silver brazing applications, a joint gap of 0.05–0.2mm when cold is recommended. Capillary action is most effective at narrow, consistent gaps — gaps wider than 0.2mm reduce capillary pull and produce unreliable joint fill. The gap should be assessed at room temperature, accounting for the change in dimensions as components reach brazing temperature due to differential thermal expansion.

Can I braze stainless steel?

Yes. Stainless steel requires a specialist alloy and flux combination due to its stable chromium oxide surface layer. We recommend L-AG45SnSi alloy with Stay-Silv Black paste flux for most stainless steel brazing applications. AG206 with GSHT5 flux is an alternative where a lower silver content is preferred. See our special applications page for full guidance.

Which silver brazing alloy should I start with?

For general-purpose work on copper, brass and mild steel, AG103 (55% silver, 630–660°C) with GS30 flux is the most versatile combination in our range and the recommended starting point for most applications. If cost is a consideration and the application allows a slightly wider melting range, AG105 (40% silver) or AG107 (30% silver) offer a meaningful saving without significant compromise in joint quality.

What is the difference between silver brazing alloys and copper phosphorus alloys?

Silver brazing alloys (AG series) contain silver, copper and zinc, and are suitable for a wide range of base metals including steel, stainless steel and nickel alloys. Copper phosphorus alloys (CP series) contain copper and phosphorus, and are self-fluxing on copper — making them the cost-effective standard specification for copper-to-copper joints in refrigeration, HVAC and plumbing. Copper phosphorus alloys are not suitable for ferrous metals or nickel alloys.