Certified Materials and Full Documentation for Safety-Critical Joints

GS Metal Joining supplies silver brazing alloys for aerospace structural and fluid system applications, with full material certification. We supply aerospace manufacturers and specialist contractors across the UK, providing the certified materials, documentation and technical support that aerospace brazing applications demand.

Alloy Grade and Certification Level

Not all alloys in the standard EN1044 range carry the same certification level. The specific grade required will depend on your application, the parent materials being joined, and the documentation requirements of your quality management system. Contact us with your specification and we will confirm which alloys are available and what documentation we can provide.

  • AG103

    55% silver, melting range 630–660°C. The general-purpose aerospace grade combining the lowest melting range in the standard EN1044 silver alloy range with excellent fluidity and the highest ductility. The benchmark specification for aerospace structural and fluid system joints, suitable for copper, copper alloys, steel and nickel alloys. Available with full material certification.

    View AG103 
  • L-AG45SnSi

    For stainless steel, nickel alloy or specialist aerospace base metals. The tin and silicon additions improve wetting on these difficult-to-braze surfaces, and the narrow 640–680°C melting range gives precise temperature control during the brazing cycle. Use with Stay-Silv Black flux. Recommended for aerospace applications involving stainless steel fluid system components and nickel alloy structural joints.

    View L-AG45SnSi 

Joint Design and Process Considerations

Aerospace brazed joints are typically designed to close capillary tolerances — joint gaps of 0.05–0.1mm when cold are standard for most structural and fluid system applications. Consistent gap control through component tolerance management and fixturing is essential to produce reliable, repeatable joint fill.

For production aerospace brazing, preforms are the preferred alloy form — they deliver a defined alloy volume in a fixed position, eliminating the operator variability of hand-fed rod and making it straightforward to demonstrate process control for quality documentation purposes. Brazing paste is used where preforms cannot be accurately positioned.

Materials, Certification and Documentation

All aerospace brazing alloys we supply conform to EN1044, BS1845 and EN17672 as applicable.

We can supply the following certification and documentation for aerospace applications:

  • Material test certificates confirming chemical composition
  • Conformance certificates to EN1044, BS1845 and EN17672
  • Batch traceability records
  • Certificate of conformity
  • Safety data sheets

Quality, Traceability and Available Forms

Aerospace brazing requires a documented, controlled process from material receipt to finished joint inspection. We understand the documentation requirements of aerospace supply chains and can provide full batch traceability from raw material through to finished alloy form. Materials are supplied with the certification required to support your incoming goods inspection and quality records.

If you are establishing a new aerospace brazing process or reviewing an existing one, our technical team can assist with alloy and flux selection, process parameter guidance and documentation requirements.

Available forms: bare rods and wire in standard stock; preforms — custom rings, washers and cut preforms to drawing; paste available through our LINBRAZE partnership for automated processes; non-standard forms available to order.

  • Certified materials

    Silver brazing alloys conforming to EN1044, BS1845 and EN17672. Full batch traceability from raw material to finished alloy.

  • Technical expertise

    Over 110 years of combined experience in silver soldering and brazing, including high-integrity aerospace applications. We support alloy and flux selection, process parameter guidance and documentation requirements.

  • Competitive pricing

    As a focused, efficient business with tightly controlled overheads, we offer genuinely competitive pricing on certified aerospace-grade materials — without the overhead burden of larger distributors.

  • LINBRAZE partnership

    As UK representative of LINBRAZE S.R.L. of Italy, we provide access to a world-leading manufacturer of metal powders and brazing pastes — including bespoke preform production and paste formulations for aerospace automated brazing processes.