The Right Alloy for Every Refrigeration Joint

GS Metal Joining supplies a comprehensive range of brazing alloys, fluxes and solders for commercial and industrial refrigeration applications. From copper tube and fitting joints on site installations to high-volume OEM compressor and heat exchanger manufacture, we supply the right material specification for every stage of refrigeration system production and maintenance.

Our materials conform to EN1044, BS1845 and EN17672 as applicable, and are available in a full range of forms including bare rods, flux-coated rods, wire, preforms, paste and powder.

  • Silver copper phosphorus alloys

    The standard specification for copper-to-copper refrigeration pipework. Self-fluxing on copper — no separate flux needed. CP102 (15% silver) and CP101 (18% silver) are the preferred grades, giving the best ductility and resistance to thermal cycling and vibration. CP103 and CP104 suit less demanding static joints where cost is a priority. Flux is required on brass fittings.

    View silver CP range 
  • Copper phosphorus alloys

    Silver-free grades for copper-to-copper joints where cost is the main consideration. Self-fluxing on copper. CP201, CP202 and Phoson suit static, low-stress joints, while CP302 and Blockade contain tin for a lower melting range and reduced heat input. Silver-bearing grades remain preferred for joints subject to vibration or thermal cycling. Not for steel or nickel alloys.

    View copper phosphorus range 
  • Silver brazing alloys

    For dissimilar metal joints, OEM production and applications requiring EN1044 certified materials with full traceability. AG107 (30% silver, 665–755°C) is widely used in refrigeration for copper and copper alloy joints where a silver alloy is preferred. AG105 (40% silver, 650–710°C) gives improved fluidity for more demanding joint configurations. Use with GS30 paste flux.

    View AG range 
  • Preforms and brazing paste

    For OEM production of compressors, heat exchangers and pipework assemblies. Rings and preforms place a fixed volume of alloy exactly where it is needed, removing operator variability. Brazing paste, supplied through our LINBRAZE partnership, combines alloy and flux for induction and automated brazing. Both are available in silver copper phosphorus and silver brazing grades.

    View preforms and rings 

Recommended Specifications

ApplicationRecommended alloyFlux requiredNotes
Copper pipe to copper fittingCP102 or CP101None (self-fluxing)Standard refrigeration pipework
Copper pipe to copper fitting (silver-free)CP201, CP202, CP203 or PhosonNone (self-fluxing)Static, low-stress joints
Copper pipe to brass fittingCP102 or CP101GS30 paste fluxFlux required on brass
Copper to steel (dissimilar)AG107 or AG105GS30 paste fluxEN1044 certified
OEM production — certifiedAG107 or AG105GS30 paste fluxFull traceability available
Compressor assemblyCP101 or AG107As applicableContact us for specification
Heat exchanger manufactureCP102 or brazing pasteAs applicablePaste for automated processes

Nitrogen Purging

For refrigeration systems using HFC, HCFC or HFO refrigerants, brazing under a nitrogen purge is standard practice and in many cases a regulatory requirement under F-Gas legislation. Nitrogen displaces oxygen inside the pipe during brazing, preventing the formation of copper oxide scale on the internal pipe surface. Oxide scale contaminating the refrigerant circuit is a known cause of compressor and expansion valve failure.

The brazing alloy and flux selection does not change for nitrogen-purged brazing. Contact us if you need guidance on technique adjustments for nitrogen-purged installations.

Production Brazing for Refrigeration OEMs

For OEM refrigeration manufacturers brazing high volumes of the same joint configuration, preforms and paste offer significant process advantages over hand-fed rod. Preforms deliver a fixed alloy volume in a defined position, eliminating operator variability and simplifying automated and semi-automated brazing processes. Brazing paste, supplied through our LINBRAZE partnership, is the standard specification for induction brazing and robotic brazing applications.

We supply blue-chip OEM refrigeration manufacturers with certified materials, consistent supply and full traceability documentation. Volume pricing is available — contact us to discuss your supply requirements.

Flux Selection and Available Forms

For silver copper phosphorus alloys on copper-to-copper joints, no flux is required. For copper alloy joints (brass fittings, bronze valves), GS30 general-purpose paste flux is the standard choice, active to 800°C (FH10). For silver brazing alloys on copper and steel, GS30 is again the correct specification. Stay-Silv White paste is an alternative to GS30 with the same EN standard (FH10) and a wider active range (566–871°C).

Standards and Certification

All silver brazing alloys conform to EN1044. Silver copper phosphorus alloys conform to recognised international standards. Materials are manufactured from virgin raw materials and are fully RoHS and COSHH compliant. Full material documentation including test certificates and batch traceability is available on request for OEM supply.

  • Certified materials

    All silver brazing alloys conform to EN1044, manufactured from virgin raw materials — fully RoHS and COSHH compliant. Full material documentation and batch traceability available on request.

  • Technical expertise

    Over 110 years of combined experience in silver soldering and brazing. We advise on alloy and flux selection, nitrogen purging technique and OEM process specification for refrigeration applications.

  • Competitive pricing

    As a focused, efficient business with tightly controlled overheads, we offer genuinely competitive pricing at every order size — from small users to high-volume OEM production operations.

  • LINBRAZE partnership

    As UK representative of LINBRAZE S.R.L. of Italy, we provide access to a world-leading manufacturer of metal powders and brazing pastes — including specialist preform production and bespoke paste formulations for automated refrigeration brazing.