Collection: Copper & Phosphorus Alloys

GS Metal Joining supplies a full range of copper phosphorus brazing alloys, both silver-bearing and no-silver grades. These alloys are self-fluxing on copper in air — no separate flux is required for copper-to-copper joints — making them the cost-effective, practical specification for refrigeration, HVAC, plumbing and general copper fabrication.

The addition of silver to the copper phosphorus base lowers the melting point, improves fluidity and increases the ductility and strength of the finished joint. For applications where joint performance under vibration, pressure cycling or thermal stress is important, a silver-bearing grade is the correct specification. Where the application is less demanding and cost is the primary driver, no-silver grades offer a meaningful reduction in material cost.

All alloys are available as rods, wires, preforms, powders and pastes.

Copper Phosphorus Brazing Alloys

No-silver copper phosphorus alloys for cost-sensitive copper-to-copper joints where joint ductility is not a primary requirement. CP201, CP202, CP203, CP302, Phoson and Blockade cover a range of phosphorus contents and melting ranges — including the tin-bearing CP302 and Blockade for lower-temperature brazing. Self-fluxing on copper in air. Widely used in plumbing, heating and general copper fabrication. Not recommended for joints subject to vibration, impact or significant thermal cycling — specify a silver-bearing grade for those applications.

View Copper Phosphorus Brazing Alloys

Silver Copper Phosphorus Brazing Alloys

Silver-bearing copper phosphorus alloys combining the self-fluxing properties of copper phosphorus with improved ductility, lower melting point and better joint performance. CP101 through CP105 and Dynaflow cover a range of silver contents from 2% to 18%. CP101 at 18% silver is the highest-silver grade and CP102 at 15% silver offers the best ductility — both recommended for refrigeration, air conditioning and HVAC joints subject to vibration, thermal cycling or pressure fluctuation. Self-fluxing on copper; flux required on copper alloy joints.

View Silver Copper Phosphorus Alloys

Which Copper Phosphorus Alloy Should I Specify?

The key decision is whether the application requires the improved ductility and lower melting point of a silver-bearing grade, or whether a no-silver grade is adequate. For refrigeration, air conditioning and HVAC pipework subject to vibration and pressure cycling, specify CP102 or CP101. For standard domestic plumbing and heating where static copper-to-copper joints are the norm, CP201 or CP202 is typically adequate. For all other applications, contact our technical team for a specific recommendation.

  • Certified materials

    All copper phosphorus alloys are manufactured from virgin raw materials — fully RoHS and COSHH compliant. Full material documentation and batch traceability available on request.

  • Technical expertise

    Over 110 years of combined experience in silver soldering and brazing. We advise on grade selection across refrigeration, HVAC, plumbing, heating and general copper fabrication applications.

  • Competitive pricing

    As a focused, efficient business with tightly controlled overheads, we offer genuinely competitive pricing at every order size — from single users to high-volume refrigeration and HVAC contractors.

  • LINBRAZE partnership

    As UK representative of LINBRAZE S.R.L. of Italy, we provide access to copper phosphorus brazing pastes and preforms for automated and production brazing applications.